Finding Robert Wood: The Long Lost Foundry Of An Iconic Ironworker

September 21, 2015 | by Karen Chernick


Photo: Michael Bixler

The empty lot where Robert Wood’s iron works foundry once stood at 12th and Spring Garden awaits new life | Photo: Michael Bixler

The long vacant, overgrown lot at the triangular intersection of Ridge Avenue, 12th, Buttonwood, and Spring Garden Streets–once Robert Wood’s ornamental iron work foundry–remains a dead space even as its dusty industrial neighbors come to life. Work begins next year on the nearby Reading Viaduct Rail Park and incremental real estate development has begun to change the cityscape around it. In May, planners completed a two-year study that aims to transform Spring Garden Street into a 2.1 mile greenway between the Schuylkill and Delaware Rivers.

The Wood foundry helped make Philadelphia famous nationwide for its output of masterful, cast iron sculptures and decorations. Now the 30,000 square foot site, owned by accountant Kim Y. Ling, seems primed for new life.

A Decorated Career 

1867 lithograph by William H. Rease depicting Robert Wood’s Steam Iron Railing Works| Courtesy of The Library Company of Philadelphia

Ornamental cast iron was very popular from the late 18th century through the late 19th century. Cast iron is different from wrought iron because it allows for greater plasticity and more elaborate designs, including raised relief which cannot be accomplished with wrought iron.

Philadelphia iron manufacturers set up foundries around Ridge Avenue and Callowhill Street. Finney & Son at 531 N. 12th Street–a business contemporary of Robert Wood–retains its original storefront today as a tombstone and mausoleum business. The building was vacant until the 1980s when a local sculptor began using the space for a studio. DJ extraordinaire Diplo bought the property in the mid-oughts and used it for a recording studio and the headquarters for his record label Mad Decent. In 2010 the music and arts space Philadelphia Mausoleum of Contemporary Art (PhilaMOCA) moved in.

Robert Wood’s cast iron railings, window guards, and awnings are believed to decorate many Rittenhouse neighborhood townhouses, and the foundry’s decorative chairs and sculptures are often available at local auctions and antique stores. The ornamental iron works also produced many of the cast iron gates and sculptures that adorn Laurel Hill Cemetery, and Wood’s colossal statues of historic figures–Henry Clay, Dr. John Witherspoon, and Abraham Lincoln–are scattered throughout the country. The popular demand of Wood’s lacy, Victorian style fences led the foundry to open a branch in New Orleans and created much of the existing ornamental cast iron work there.

Robert Wood’s enterprise had modest beginnings. He opened his forge in 1839 with only one boy to assist him and operated under the simple name “Robert Wood” until 1849, when the business expanded and its name was changed to “Robert Wood, Iron Rail Foundry and Manufacturing.” By 1853, Wood’s business had blossomed into nearly an acre of workspace with 200 employees.

Robert Wood

This Hexamer General Surveys map gives a visual orientation of the triangular parcel on which the foundry once stood | Courtesy of the Map Collection, Free Library of Philadelphia

Wood further expanded when he partnered with Elliston Perot, becoming Wood & Perot from 1857 to 1865. Finally, in its last incarnation, the foundry was renamed Wood & Perot Ornamental Iron Works from 1865 until the company went bankrupt and the foundry closed in 1878.

The foundry grew in size as did its ability to take on more sophisticated and labor-intensive projects. Wood began his career simple making window guards and awning posts and worked his way up to colossal bronze statues. His largest iron work was a 15 foot sculpture of Henry Clay for the town of Pottsville, Pennsylvania.

Another large sculpture for which Wood received a lot of attention was the statue of Rev. Dr. John Witherspoon, unveiled in Fairmount Park on the occasion of the 1876 Centennial. Producing such large sculptures in the mid-19th century was quite an undertaking.

Making Heavy Metal 

Wood & Perot’s factory along Ridge Avenue in 1858 by photographer James McClees | Courtesy of The Library Company of Philadelphia


Projects began in the pattern room, where the pattern maker created a wooden model to size, which, alone could take several weeks. The final designs were then taken to the foundry where a mold was constructed form the pattern. Since it was so laborious to produce these patterns, they were kept in a storeroom for future projects. In 1853, Wood’s pattern room was filled with between 3,000-4,000 patterns, 150 of which were fence patterns. (View Robert Wood’s portfolio of original, ornamental iron work archive HERE.)

While the molder was at work, the charger prepared a cylindrical 12 foot tall by 38 inch wide cupola (or melting pot) into working order. The inside of the cupola needed to be methodically stacked with sand, wood, coal, imperfect castings from the previous day, and then more coal and iron. Once the contents of the cupola were lit it would take two hours for the iron to melt. Foundry workers would then spend an entire afternoon bringing ladles to an opening at the bottom of the cupola and filling molds situated all over the room with the liquid iron.

Photo: Michael Bixler

Someone please find Willy’s right shoe. The William Cresson memorial statue in Laurel Hill Cemetery at plot W-284. It is one of many iron sculptures around the country made by Wood’s foundry | Photo: Michael Bixler

Castings were then hoisted into the cleaning room, where they were cleaned with files, wire brushes, and hickory brooms. After cleaning, castings were taken to one of the three finishing rooms at the factory.

There was also a drilling room at Robert Wood’s factory. A blacksmith shop attached to the main building made all of the wrought iron work, and the foreman there marked the position and size of holes needed to screw wrought iron pieces together. Once the necessary markings were made, works would be sent to the drilling room so that the driller could make holes with a drill powered by a steam engine.

A Rotten Ending for Wood

Wood & Perot filed for bankruptcy in 1878, and the company’s inventory of sculptures, ornaments, patterns and patents was sold to various other manufacturers. It is unclear exactly what led to the foundry’s demise, but it is possible that the increasing availability of less expensive zinc statues in the late 19th century cut into the market of the more labor-intensive cast iron works.

Photo: Michael Bixler

Ornate iron fencing surrounds a home at 18th and Delancy Place. Much of the decorative iron work in New Orleans can be attributed to Robert Wood | Photo: Michael Bixler

After Wood & Perot vacated the foundry at 1126 Ridge Avenue it became the showroom of Haines, Jones, and Cadbury Co., a plumbing and heating company that is still in operation today. When the company moved out in 1931, the old foundry then sat vacant until 1937. Central Company Lumber Yard took over the property in 1940 and stayed at this location until the 1960s. The foundry sat vacant again until the 1990s when a proposal to convert the remaining buildings into a self storage facility emerged, but the project was never realized and the foundry was demolished. In 2002, a proposal to redevelop the lot for a fast food pad site was rejected by the Chinatown Neighborhood Association. Then, Posel Management Company proposed building a retail strip building facing Buttonwood Street and pave the rest of the lot for surface parking. Next up was a proposal to build phase two of the Lucky Garden Condominiums at 12th and Hamilton Streets, but plans fell through even before the fiscal crisis. Kim Ling, who operates accounting offices in Chinatown and South Philadelphia, purchased the lot in 2007 for $2,020,813. Attempts to reach Ling to discuss future plans for the site were not successful.


About the Author

Karen Chernick Karen Chernick is an art historian and museum professional who recently moved to Philadelphia from Tel Aviv. She is excited to discover the stories that her new home has to tell through its design, architecture and urban renewal.


  1. Brad Peniston says:

    Love this kind of piece. Wonderful. Kudos.

  2. Jim Clark says:

    Yes it is a fine article, lots of great info. Thank you Karen.

  3. Davis says:

    As I wonder around town I often see examples of their work still in use – numerous fences for example have their trademark on them.

  4. DeeGee says:

    Great research on this business site. Especially, liked the photos and old prints. Would be great to see an article about how to research an old property/business in Philadelphia archives. I have a family business in that area. Thanks!

  5. Liz says:

    Robert Wood is my ancestor. I’m trying to get the family history together. I have a couple of pieces of ornamental iron work from the Philadelphia foundry, that I wish to learn about

    1. Isabelle Markley says:

      The Civil War soldier statue standing on a raised mound in the Veteran’s Park at Elm and Park Street in Waterville, Maine has the following stamp on the bottom edge of the bronze statue-R. Wood & Co Bronze Founders Phila. the statue mounted on what looks like a granite base is engraved on the back “Erected by the citizens of Waterville 1876”. On the front of the base “To the memory of the soldiers and sailors of waterville who gave their lives for the preservation of the Republic 1861-1865”.Hope this information is helpful for your family history. I was in the park today and copied the information for a veteran’s day story.

    2. Tom says:

      I believe Robert Wood is the same family who’s Iron works businesses in New Jersey and Philadelphia eventually started a dairy and milk delivery in 1901 and opened convenient stores in 1964.
      Maybe this is a different Robert Wood but Wawa Inc. was incorporated in 1803 and they produced iron works. The business was split between a half dozen sons and of those, one business continued to redefine itself and remains one of the top companies in Philadelphia today.
      If this Robert Wood is of the same Wood family that created Wawa, you may descend from a very long line of entrepreneurials.

    3. Joe says:

      I am doing an article for our Balwin Park website about Thomas Wood’s Fairmount Iron Works in Philadelphia in the mid-1800s, as well as the Pequea Mills of his son, William Wood, two blocks away. I am curious if they are in the line of descent from David C. Wood. Do you have any info? Thanks.
      Joe Walsh

  6. Sanford Arst says:

    I just read the article about the Wood &Perot Foundry. They produced a Cornstalk pattern which was used in two fences in New Orleans. One fence is on Royal Street in the French Quarter the other on Fourth Street in Uptown. I know this is a long shot,, but would you have any information regarding who might have possession of this pattern? My wife and I want to have it reproduced for our home in Baton Rouge, Louisiana.

    Any information that could aid us in this search would be greatly appreciated.


    Sanford A. “Sandy” Arst
    8631 Crest Court
    Baton Rouge, Louisiana 70809

    1. Phil Nickles says:

      I have 4 of his garden chairs for sale. Selling for 8,000

  7. Len says:

    Like Sandy a month before me, I just stumbled upon your post. Another example of Wood’s work is “Allegory of the Schuylkill River,” originally located in the Central Marble Fountain in the South Garden of the Fairmount Water Works. The work was an 1872 cast of an 1809 wood sculpture by William Rush, first placed in a fountain at the Centre Square Engine House of the Schuylkill and Centre Square Water Works in 1809 and moved to Fairmount in 1829. Wood’s sculpture is currently on display in the Philadelphia Museum of Art; a reproduction was placed in the Central Marble Fountain in December 2017.

    A write-up with photos may be accessed on the Hidden City website: http://hiddencityphila.org/2018/02/replicas-of-william-rush-originals-return-to-fairmount-water-works/

  8. Todd A. Milano says:

    My wife recently bought a fountain embossed “ROBERT WOOD & Co. MAKERS PHILa”. Karen Chernick’s article helped us date the ornamental iron work and inspired my wife to make it functional again. Thank you Ms. Chernick!

  9. Teddy Golter says:

    I have a fountain whose base is approx. 7.5 ft diameter and the center is approx. 5 ft tall. The cast on the base says “Roert Wood & Co. Phila.”

    Could this be the same Robert Wood and did he cast this fountain.

  10. Teddy Golter says:

    OOps, typo. the fountain cast mark says “Robert Wood & Co. Phila”

  11. PhillipNickles says:

    I have 5 garden pieces and wanted to confirm that they were Robert Wood. And possibly value. What email can I send pictures to?

  12. Really helpful article about the ironworker! You really have a great stuff on this topic! Thanks for the valuable information…

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.